>
> > Can I enable "port mirroring" on a ServerIron XL? I have a host that's
> > acting up and I'd like to mirror all of its traffic to another port so
> > Snort can listen to it.
>
>
> I've never tried it, but the manuals seem to indicate that you can.
>
> Use the "mirror-port" command to define a mirror port, and
> the "monitor on" command within the interface definition to specify
> the port to be mirrored.
>
> See
> http://www.foundrynet.com/services/documentation/siCLI/ServerIron_CLI_global_CONFIG.html#31529
>
Just a quick followup - thanks! This worked. I must have been blind when I
was looking at the documentation. :)
-Jonathan
From [EMAIL PROTECTED] Wed Dec 10 00:51:02 2003
From: [EMAIL PROTECTED] (David Newman)
Date: Wed Dec 10 00:51:45 2003
Subject: [f-nsp] ssh version support
Message-ID: <[EMAIL PROTECTED]>
Does the Bigiron support SSHv2?
thanks
dn
From [EMAIL PROTECTED] Wed Dec 10 02:09:36 2003
From: [EMAIL PROTECTED] (Cliff Albert)
Date: Wed Dec 10 02:09:36 2003
Subject: [f-nsp] ssh version support
In-Reply-To: <[EMAIL PROTECTED]>
References: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
On Tue, Dec 09, 2003 at 09:51:02PM -0800, David Newman wrote:
> Does the Bigiron support SSHv2?
According the output I get on telnetting to port 22 on our BigIron
(software Version 07.6.01bT53) it doesn't. However I'm not sure if the
07.6.04 branch supports it.
--
Cliff Albert | RIPE: CA3348-RIPE | https://oisec.net/
[EMAIL PROTECTED] | 6BONE: CA2-6BONE |
PGP Fingerprint = 9ED4 1372 5053 937E F59D B35F 06A1 CC43 9A9B 1C5A
From [EMAIL PROTECTED] Wed Dec 10 04:41:13 2003
From: [EMAIL PROTECTED] (George Bonser)
Date: Wed Dec 10 04:41:18 2003
Subject: [f-nsp] ssh version support
In-Reply-To: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
According to this:
http://www.foundrynet.com/services/documentation/security/SSH.html#108
NOTE: Foundrys implementation of SSH supports SSH version 1.5. All
references to SSH in this document are to SSH version 1.5
On Wed, 10 Dec 2003, Cliff Albert wrote:
> On Tue, Dec 09, 2003 at 09:51:02PM -0800, David Newman wrote:
>
> > Does the Bigiron support SSHv2?
>
> According the output I get on telnetting to port 22 on our BigIron
> (software Version 07.6.01bT53) it doesn't. However I'm not sure if the
> 07.6.04 branch supports it.
>
> --
> Cliff Albert | RIPE: CA3348-RIPE | https://oisec.net/
> [EMAIL PROTECTED] | 6BONE: CA2-6BONE |
> PGP Fingerprint = 9ED4 1372 5053 937E F59D B35F 06A1 CC43 9A9B 1C5A
> _______________________________________________
> foundry-nsp mailing list
> [email protected]
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
