On Thu, Apr 29, 2004 at 08:45:50AM +0200, Cliff Albert wrote:
> On Wed, Apr 28, 2004 at 03:56:50PM -0700, Scott Weeks wrote:
>
> > Anyone know if it's possible to get traffic counters from SNMP for virtual
> > interfaces? Most likely a rhetorical question, since I see:
>
> > But, I just had to ask the group. I'm setting up RRDTool and Cricket and
> > would like to get stats on the virtual interfaces.
>
> Same issue here, I think this is not supported by Foundry boxes. I just
> count bytes at the switch ports in which these virtual interfaces
> terminate.
When you say virtual interfaces, are you talking what Cisco calls
subinterfaces, e.g. VLAN traffic on a port, or are you talking virtual
servers a la ServerIron? No experience with the former and not sure if
it's possible, but there are some Cricket examples for graphing virtual
servers (though I'm not using them.)
-- Clifton
--
Clifton Royston -- [EMAIL PROTECTED]
Tiki Technologies Lead Programmer/Software Architect
Did you ever fly a kite in bed? Did you ever walk with ten cats on your head?
Did you ever milk this kind of cow? Well we can do it. We know how.
If you never did, you should. These things are fun, and fun is good.
-- Dr. Seuss
From [EMAIL PROTECTED] Thu Apr 29 15:54:34 2004
From: [EMAIL PROTECTED] (Scott Weeks)
Date: Thu Apr 29 15:55:01 2004
Subject: [f-nsp] snmp question
In-Reply-To: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>
On Thu, 29 Apr 2004, Clifton Royston wrote:
: On Thu, Apr 29, 2004 at 08:45:50AM +0200, Cliff Albert wrote:
: > On Wed, Apr 28, 2004 at 03:56:50PM -0700, Scott Weeks wrote:
: > > But, I just had to ask the group. I'm setting up RRDTool and Cricket and
: > > would like to get stats on the virtual interfaces.
: > Same issue here, I think this is not supported by Foundry boxes. I just
: > count bytes at the switch ports in which these virtual interfaces
: > terminate.
: When you say virtual interfaces, are you talking what Cisco calls
: subinterfaces, e.g. VLAN traffic on a port, or are you talking virtual
: servers a la ServerIron? No experience with the former and not sure if
: it's possible, but there are some Cricket examples for graphing virtual
: servers (though I'm not using them.)
Hi Clifton,
I want to graph these:
interface ve 3
port-name Building A
ip address 172.16.80.1 255.255.240.0
Where we have several physical interfaces going to bldg a.
interface ethernet 2/1
port-name Building A-5915
!
interface ethernet 2/2
port-name Building A-5921
!
interface ethernet 2/3
port-name Building A-5927
It just occurred to me that I can just have the program sum all the
physical interfaces and graph the total. This is kludgy, but it should be
the same as graphing the virtual interface.
Mahalo from a mainland-constrained (temporarily) Oahu and Maui person. I
did the Digital Island thing (just down Bishop St.) a few years
back. Good luck on the Series A financing!
scott
