Dave, This should be possible with the no port-http-translate command under the new VIP. You will have to create an extra line in your serveriron configuration to define additional ports on the realservers and then bind this new port on the second VIP you create.
server virt vip1 port 80 bind http rs1 http rs2 http server virt vip2 port 80 no port http translate bind http rs1 8080 rs2 8080 server real rs1 port 80 port 8080 server real rs2 port 80 port 8080 By adding that no port http translate command the VIP will just not translate the destination port when it sends to the real server so it will still come into port 80 on the realserver, then you can use some combination of host header config to separate your sites. -Brent At 10:24 AM 9/22/2004, you wrote: >Hello, > >Currently we have a ServerIronXL setup to provide load balancing for >customers who request it. It is using a very straight forward >configuration of 2 real server IPs bound to the 1 virtual IP. My question >is: is it possible to bind those same 2 real servers to another virtual IP >without adding additional IPs to the real servers? So we could have more >than 1 load balanced site (with unique virtual IP) >coming off each server? >Thanks for any help/advice with this > >-dave > >_______________________________________________ >foundry-nsp mailing list >[email protected] >http://puck.nether.net/mailman/listinfo/foundry-nsp
