On Mon, Sep 27, 2004 at 11:30:04AM -0700, Tine Hutchison wrote: > Are you running any sort of PBR, by any chance?
No, we haven't got PBR active. > Quoting Cliff Albert <[EMAIL PROTECTED]>: > > > On Mon, Sep 27, 2004 at 11:10:44AM +0200, Calle Lidstr?m wrote: > > > > > >>I have a BigIron 4000 running 07.7.01cT53 that the ACL's stops working > > > >>on, it sounds a bit weird.. :-) > > > >> > > > >>When I apply the ACL f00-out, everything is working as expected but > > > >>after ~10 hours 0/0 can connect to 10.1.1.2, any port/protocol. > > > >> > > > >>I need to re-apply the access-grup statement on the interface for the > > > >>ACL to become "active" again. > > > >> > > > >>Have anyone seen this problem before? > > > > > > > > > > > >No, but I have the problem of ACL's working in very odd behaviour. They > > > >are very very very flacky if you apply them on virtual interfaces. I > > > >know this goes trough CPU however the documentation says that it should > > > >process it by CAM on 07.7.01 (which I'm also running on a BI4000). > > > > > > > >You did an ip rebind-acl all ? > > > > > > No, that's a new command for me. Though, I'll try that one next time I > > > notice the problem. > > > > > > This behaviour is primarly on ve-interfaces. > > > > I also only have seen ACL issues on ve-interfaces. Also weird issues > > where ACL's are matching packets that are actually on another vlan but > > on the same physical interface because it has multiple VE's. > > > > I've been contacting my support engineer for this issue but they have > > still not found the issue after more then 16 months now. > > > > BTW for good notice I'm using an HP9304 which actually is an relabeled > > Foundry Big Iron 4K with a huge s/Foundry/HP/ over the firmware. It uses > > EP blades (which is JetCore on Foundry). -- Cliff Albert <[EMAIL PROTECTED]> From [EMAIL PROTECTED] Mon Sep 27 18:07:38 2004 From: [EMAIL PROTECTED] (Ray Taft) Date: Mon Sep 27 18:07:42 2004 Subject: [f-nsp] JOB - Sr. Network Engineer (Foundry) Message-ID: <[EMAIL PROTECTED]> Howdy, I thought I would post this here. We are an all Foundry shop. We are looking for a qualified Full Time Sr. Network Engineer. Here is a little more info: http://www.craigslist.org/sby/eng/43766771.html We are located in Santa Clara, and the position is on-site. If you're interested, shoot me a resume and salary requirements. I am not a recruiter. I am the hiring manager. Respectfully, Ray -------------- next part -------------- An HTML attachment was scrubbed... URL: https://puck.nether.net/pipermail/foundry-nsp/attachments/20040927/7d3c8346/attachment.html From [EMAIL PROTECTED] Tue Sep 28 13:06:18 2004 From: [EMAIL PROTECTED] (Mike Carter) Date: Tue Sep 28 13:02:09 2004 Subject: [f-nsp] password break on fast iron 2 Message-ID: <[EMAIL PROTECTED]> Hello all, We just got a Fast iron2 as part of a Cisco package we brought in. My Technician is not able to break the password on this system. I Googled it and looked thru the archives with little success...is there a simple way to break the password? Also wondering if there is even any market for these...this one has (1) F18GMR and (3) F124E's. Maybe we skip the password break and toss this in the dumpster?????? TIA Michael Carter Major Account Manager Alta Technologies, Inc 763-475-5327 (direct) 800-546-2582 (Ext. 327) 763-475-5331 (fax) AIM mikec at alta [EMAIL PROTECTED] www.altatechnologies.com SUN CISCO RS/6000 HP-UX OVERLAND STORAGE JNI EMULEX Qlogic
