Hi, please bare in mind: sflow is only supported on the jetiron m4 boards, not on the (old) ironcore ones. I dont know about ve monitoring/accounting.
Btw, i got some foundry equipment to sell...if anyone is interessted: B2P622-SM-IR M4R4G (somehow defective, tends to crash when running bgp/using alot of routes) Regards, Jonas On Mon, 2004-10-25 at 18:57, Cliff Fogle wrote: > NTOP kind of has sflow support. It really only gives 'top talkers' > info. The best thing out there at this time is really InMon's traffic > server: > > http://www.inmon.com/products/trafficserver.php > > (warning: There is a free demo avaialble and it's addictive) > > Foundry is apparently building much better sflow support into INM 1.8, > but I have yet to see anything other than a PowerPoint mock up of it. > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Sam Stickland > Sent: Monday, October 25, 2004 6:47 AM > To: [email protected] > Subject: [f-nsp] Measurement of BigIron virtual interfaces > > Hi, > > Is it possible to measure the virtual interface bandwidth stats on the > BigIrons (Mmgt4)? I notice that the interface OID's appear to be > readable but the counters never seem to increment (running 07.7.01T53) > > Can this information be read via SNMP. If not, a cursorsy glance at the > sFlow specs seems to suggest is it possible to measure this information > using sFlow. If so are there any opensource or reasonably lightweight > tools that can process the information in this regard? > > Thanks, > > Sam > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > > > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp
