Hi Anil, The MG8 and the FI4802 use different OS images, so there are just different features in each. The cam entries refers to the number of entries in the layer 4 cam that are being used per acl. Really what you are seeing is just a difference in display, the FI4802 is giving you a little more info.
Mike On Thu, 27 Jan 2005 11:39:26 GMT, anil at kadium.us <anil at kadium.us> wrote: > > Hi, > > We are using Foundry BigIron(MG8) and FastIron 4802-PREM devices in our > datacenter. I'm new to foundry. I want to know the difference between > applying acls on physical interfaces and virtual interfaces w.r.t both > BigIron and FI4802. I observed that when we apply acls on FI4802 and do "sh > access-list xxx" it's displays as below with some rule cams: (I applied this > acl to a virtual routing interface) > > FI4802#sh access-list xxx > Show ACL counter List...... > ACL counter List : 1290 bytes > > Extended IP access list xxx (Total rule cams used: 32) > permit tcp any any eq 25(Rule cams used: 1) > permit tcp any any established (Rule cams used: 1) > > But if you apply an acl on BigIron to a physical interface and do "sh > access-list xxx", it did not display any rule cam info. Why is it so? Any > ideas? > > Thanks, > Anil > > _______________________________________________ > foundry-nsp mailing list > foundry-nsp at puck.nether.net > http://puck.nether.net/mailman/listinfo/foundry-nsp >
