hi, well got a bit further. The 3.3.x code only supports md5-challenge
reverting to the 3.2. code tree allows me to use peal/mschapv2 of course that does mean that the dot1x auth for multiple mac addresses on a single switch port is out the window. Also had a couple of small problems with our radius server radiator but they're fixed. alex --On 08 March 2005 18:50 -0800 Mike Allen <mkallen at gmail.com> wrote: > Alex, not sure how much this will help, but one thing I usually try is > to set up the login or enable authentication to use radius as well. > This is pretty simple, and will tell you whether the problem is > happening specifically with Radius, or with the dot1x. > > Mike > > On Thu, 03 Mar 2005 14:26:25 +0000, Alex Sharaz <A.Sharaz at hull.ac.uk> > wrote: >> Chaps, >> >> Anyone using dot1x on the above beast? I seem to be wading through mud >> trying to get this to work. >> >> Up till yesterday, when i was running vsn 3301a of the software, all i >> could get working was a WinXP pc configured to use dot1x with >> MD5-Challenge. >> >> This morning, having upgraded to Vsn 3301b of the software I can now get >> peap/mschapv2 working.. >> >> The problem is that the 4802 seems to be losing its connection with the >> radius server. if, after a given period of time I disable/enable the >> ethernet interface on the pc, I can type in my userid /password till the >> cows come home. You don't see any traffic at the radius server. >> >> if I power cycle the 4802 bang, it's straight in there. >> >> Anyone else seen this sort of things? >> >> Alex >> >> Sent using Mulberry 3.1.2 >> _______________________________________________ >> foundry-nsp mailing list >> foundry-nsp at puck.nether.net >> http://puck.nether.net/mailman/listinfo/foundry-nsp >> Sent using Mulberry 3.1.2 -------------- next part -------------- Virus checked by Hu-fw-yhman
