per vlan traffic stats is not a standard feature in most platforms using asic/cam switching paths
Steve On Fri, 15 Apr 2005, Sam Stickland wrote: > Hi Gunther, > > I've spoken to Foundry engineers on this and they tell me it's a hardware > limitation of the BigIron's, and it can't be fixed in software. > > Sam > > On Sat, 2 Apr 2005, Gunther Stammwitz wrote: > > > Hello Cliff, > > > > Thanks for your reply. Just found the answer in the archives too. > > > > It is absolutely unbelievable that this feature isn't being supported yet by > > foundry. I mean hey almost every Cisco box can do it and this is really > > essential for accounting purposes using mrtg. > > > > What does foundry say? Is there some kind of roadmap? > > > > Best regards, > > Gunther > > > > > > -----Urspr?ngliche Nachricht----- > > Von: Cliff Albert [mailto:cliff-nsp at oisec.net] > > Gesendet: Mittwoch, 30. M?rz 2005 19:46 > > An: Gunther Stammwitz > > Cc: foundry-nsp at puck.nether.net > > Betreff: Re: [f-nsp] Accounting VEs/vlans via SNMP (mrtg) > > > > On Wed, Mar 30, 2005 at 07:03:05PM +0200, Gunther Stammwitz wrote: > > > >> I'm currently trying to account the traffic in virtual router > >> interfaces > >> (VEs) on our Foundry Big iron 4000 that has been equipped with a gen4 > >> management module via SNMP using MRTG. > >> > >> As far as I can tell accounting on real interfaces like ethe1/1 works > >> fine but on the vlans there's always zero traffic. > >> > >> Is there some kind of special option I'll have to configure in order > >> to get this working? > > > > It can not be done using SNMP or other means. The only way to do some sort > > of accounting on VE interfaces is using sFlow. > > > > -- > > Cliff Albert <cliff at oisec.net> > > > > > > > > _______________________________________________ > > foundry-nsp mailing list > > foundry-nsp at puck.nether.net > > http://puck.nether.net/mailman/listinfo/foundry-nsp > >
