Hello Brent, Thanks for the tip but that didn't work.
Even a route-map that matches everything (no match at all) doesn't work: route-map dummy permit 5 set ip next-hop 212.211.254.85 Any ideas?? Maybe we're encountering a bug here? Best regards, Gunther > -----Urspr?ngliche Nachricht----- > Von: Brent Van Dussen [mailto:bvd at att.com] > Gesendet: Montag, 9. Mai 2005 20:38 > An: Gunther Stammwitz > Betreff: Re: [f-nsp] Source-Based-Routing on a BI 4000 > > Maybe try switching to an access-list from a prefix-list to > see if that helps? > > -Brent > > At 04:31 PM 5/8/2005, you wrote: > >Hello colleagues, > > > >I'm trying to get source based routing running on a BI 4000 with > >jetcore-modules: > > > >My config seems to be correct - at least this would work on a cisco. > >Could anyone tell me please, what's wrong of if there's something I > >should have paid attention to? > > > >Thanks, > >Gunther > > > > > >My config: > >ip prefix-list dummy seq 5 permit 1.2.3.4/32 > > > >route-map dummy permit 5 > > match ip route-source prefix-list dummy > > set ip next-hop 212.211.254.85 > > > >interface ve 200 > > ip policy route-map dummy > > > >fyi: SW: Version 07.8.00dT53 > > > >_______________________________________________ > >foundry-nsp mailing list > >foundry-nsp at puck.nether.net > >http://puck.nether.net/mailman/listinfo/foundry-nsp > >
