Thanks Erik, That works for me. Below exactly what I did:
1. login on router 2. #enable 3. #config terminal 4. (config)# show default value ~~ search for the parameter "ip-route" ~~ (my config it was limited on 140000.) To upgrade the maximum ip routes to 200000 you need to do the following: 5. (config)# system-max ip-route 200000 6. (config)# write memory 7. (config)# exit 8. #reload Kind regards, Armand ----- Original Message ----- From: "Erik Haagsman" <[EMAIL PROTECTED]> To: "A. Krijgsman - QCC" <a.krijgsman at quality-control-centre.net> Cc: <foundry-nsp at puck.nether.net> Sent: Thursday, December 29, 2005 4:54 PM Subject: Re: [f-nsp] BGP: No path is selected as BEST route > Armand, > > On Thu, 2005-12-29 at 17:04 +0100, A. Krijgsman - QCC wrote: > > My question: > > Do I need to do a software update in able to fix the routing problem? > > (Cause I have never done this before and I prefere testing it a bit > > more before doing it in a live enviroment) > > You really need a "show default value" from config mode and look up the > "ip-route" parameter to see how much routes can be installed. If it's > below the number of routes you're receiving from a single full BGP feed, > chances are you're loosing routes. If you've got enough memory left, you > can increase the value using the "system-max" command, also from config > mode. Check the Foundry docs for more info on the command and possible > parameters. If you do change the value, you'll need to reload the switch > in order for the change to become effective. But before you do, make > sure that the next-hops of the routes are reachable via a direct route > or IGP, since that can also cause routes to not become active. > > Cheers, > > -- > --- > Erik Haagsman > Network Architect > We Dare BV > Tel: +31(0)10-7507008 > Fax: +31(0)10-7507005 > http://www.we-dare.nl > > >
