Everybody, Thanks for all your replys.
Cliff Fogle wrote: >Also keep in mind that dm raw only shows packets that hit the CPU. >Mostly broadcast, multicast and packets with a destination of the switch >itself. > >I've mostly found it useful for tracking down rogue network equipment >running spanning-tree and detecting a host sending out flow control >PAUSE frames. > >-----Original Message----- >From: foundry-nsp-bounces at puck.nether.net >[mailto:foundry-nsp-bounces at puck.nether.net] On Behalf Of Stephen J. >Wilcox >Sent: Thursday, January 19, 2006 10:35 AM >To: Gregory Edigarov >Cc: foundry-nsp at puck.nether.net >Subject: Re: [f-nsp] dm raw command output > >without looking, this should work for you: > >dm raw filter 0 in-port xx [whatever port you want to view] >dm raw max 50 [limit to 50 packets] >dm raw mode brief [one packet per line, brief] >dm raw [go! type again to stop before you hit the max limit if you want] > >you need to delete the filter if you want to change the criteria, >something like >'dm raw filter all none' .. you should be able to work it out from the >cli help > >Steve > >On Thu, 19 Jan 2006, Gregory Edigarov wrote: > > > >>Hello, >> >>what is the full command sequence for dm raw subcommands? >>I wanna look at the traffic as it flows through my router. I was >> >> >told > > >>that is done with "dm raw mode brief" command, but I cannot get an >> >> >output. > > >>Should I look at the console, or there is an option redirecting output >> >> > > > >>to where I want? >> >>Thank you. >> >> >> >> >> > >_______________________________________________ >foundry-nsp mailing list >foundry-nsp at puck.nether.net >http://puck.nether.net/mailman/listinfo/foundry-nsp > > > > >
