Wow. That looks like a bug. My show proc cpu usually shows LESS cpu usage, I think because it's not really showing all processes.
-----Original Message----- From: Gerald Krause [mailto:[EMAIL PROTECTED] Sent: Wednesday, January 25, 2006 12:11 PM To: Cliff Fogle Cc: foundry-nsp at puck.nether.net Subject: Re: [f-nsp] Problem with CPU load monitoring via SNMP On Wednesday 25 January 2006 19:54, Cliff Fogle wrote: > Personally I like to use the snAgentCpuUtilTable, it gives the CPU > values in one hundredths of a percent, so 10000 = 100% Util. It is > available on all devices except ServerIron and the OEM edgeiron's. ... > What does doing an snmptable of the above table show for your device? The same (because 100 is here the same as 1 in the other table I used before): enterprises.1991.1.1.2.11.1.1.4.1.1.1 = Gauge32: 100 enterprises.1991.1.1.2.11.1.1.4.1.1.5 = Gauge32: 100 enterprises.1991.1.1.2.11.1.1.4.1.1.60 = Gauge32: 100 enterprises.1991.1.1.2.11.1.1.4.1.1.300 = Gauge32: 100 Never below, never above 100 even when I tried to stress the router a little bit with flooding ICMPs destinated to his loopback interface. Furthermore I found out that the "show cpu" values are equal to the SNMP values: # sh cpu 1 percent busy, from 121 sec ago 1 sec avg: 1 percent busy 5 sec avg: 1 percent busy 60 sec avg: 1 percent busy 300 sec avg: 1 percent busy I guess "sh proc cpu" has nothing to do with the real CPU load value. Maybe it represents only a more detailed process statistic related to the "1% busy CPU"? --Gerald
