Hello,
I currently have a Cisco 3550 setup routing vlans and everything is great with that and the Cisco 2950's. So I just got in a EIF2402CF to test and cannot get it to work. I cannot ping the default gateway (on 3550) setup for the subnet I am testing. The vlan/subnet I am testing with is Vlan 2. Here is what I have for a config. Cisco 3550 ------------------------- interface FastEthernet0/11 description Uplink to EIF2402CF-1 switchport trunk encapsulation dot1q switchport mode trunk interface Vlan2 description APC-Reboot-VLAN ip address 204.16.245.65 255.255.255.224 secondary ip address 208.10.143.161 255.255.255.224 dist0-1.pitbpa#sh int trunk Port Mode Encapsulation Status Native vlan Fa0/11 on 802.1q trunking 1 Fa0/23 on 802.1q trunking 1 Fa0/24 on 802.1q trunking 1 Port Vlans allowed on trunk Fa0/11 1-4094 Fa0/23 1-4094 Fa0/24 1-4094 Port Vlans allowed and active in management domain Fa0/11 1-22 Fa0/23 1-22 Fa0/24 1-22 Port Vlans in spanning tree forwarding state and not pruned Fa0/11 1-22 Fa0/23 1-22 Fa0/24 1-22 ---------------------------------------------------------------------------- ----------------------- EIF2402CF Config: vlan 2 name remote-reboot tagged ethernet 1/23 to 1/25 interface ethernet 1/23 description rrp3-1 interface ethernet 1/25 switchport mode trunk Please let me know if there is any other config you need. Everything looks fine to me, but when plugged into port 23 on the EIF and trying to ping the default gateway for vlan 2 on the 3550, I get nothing. Any ideas? Thanks, Brendan -------------- next part -------------- An HTML attachment was scrubbed... URL: https://puck.nether.net/pipermail/foundry-nsp/attachments/20060101/a1f74c6a/attachment.html
