I don't have any experience at 10 Gbps on the FESX, and very little L3. But I have about 20 of the FESX deployed with another 22 going out shortly. They've been a pleasure to work with, no problems at all.
I would not expect to get 10 Gbps L3 forwarding out of them. They aren't marketed as such. You should just ask your Foundry sales engineer. I'm thinking you will get pointed towards a SuperX (with just 24 gig ports and 2 10 Gbps ports I think the price point would be very similar to a FESX-424-PREM) or BigIron RX. Polling VE's? Doubtful, there are all sorts of reasons that this is difficult. If you want to do this you would be much better off investing in an SFLOW collector: http://inmon.com/products/index.php Or even Foundry's Ironview. Last time I checked the IronView's sflow stuff was not up to snuff, but they recently partnered with Inmon...I would expect it to get better soon. The Inmon/SFLOW product has solved most of my recent network anomalies. It can do a whole bunch more than just tell you how busy a VE is. -----Original Message----- From: [EMAIL PROTECTED] [mailto:foundry-nsp-bounces at puck.nether.net] On Behalf Of Brian W. Gemberling Sent: Monday, February 27, 2006 12:02 PM To: foundry-nsp at puck.nether.net Subject: [f-nsp] FastIron Edge X... Hello, We are looking at getting a couple Fast Iron Edge X switches. We are planning to run in L3 mode. Does anyone have any experience running these at 10+ Gb/s in L3 mode? If so, how do these switches do at handling L3 forwarding. Do they support SNMP polling of VEs? _______________________________________________ foundry-nsp mailing list foundry-nsp at puck.nether.net http://puck.nether.net/mailman/listinfo/foundry-nsp
