Hi All, Does anyone has an explination for this? - Two routers in VRRP-E. - IBGP session between them.
Why don't the IBGP peers sent eachother their entire received full-transtit routes? Does not make sense to me :-( Thanks in advance. Regards, Armand Summary: +++++++++++++++++++++++++++++++++++++++++ RT1: SSH at ams-gs-rt1>show ip bgp summary BGP4 Summary Router ID: 195.144.2.2 Local AS Number : 35829 Confederation Identifier : not configured Confederation Peers: Maximum Number of Paths Supported for Load Sharing : 1 Number of Neighbors Configured : 2, UP: 2 Number of Routes Installed : 325556 Number of Routes Advertising to All Neighbors : 118348 Number of Attribute Entries Installed : 61441 Neighbor Address AS# State Time Rt:Accepted Filtered Sent ToSend 195.144.2.3 35829 ESTAB 3d 9h59m 143228 0 118347 0 217.170.9.129 24785 ESTAB 4d12h11m 182327 0 1 0 RT2: SSH at ams-gs-rt2>show ip bgp summary BGP4 Summary Router ID: 84.233.188.98 Local AS Number : 35829 Confederation Identifier : not configured Confederation Peers: Maximum Number of Paths Supported for Load Sharing : 1 Number of Neighbors Configured : 2, UP: 2 Number of Routes Installed : 297731 Number of Routes Advertising to All Neighbors : 143226 Number of Attribute Entries Installed : 52427 Neighbor Address AS# State Time Rt:Accepted Filtered Sent ToSend 84.233.188.97 8928 ESTAB 7d 2h57m 179398 0 1 0 195.144.2.2 35829 ESTAB 3d 9h58m 118332 0 143225 0
