instead of using an access-list try using a prefix list.. On Fri, June 2, 2006 12:34, Scott Tuc Ellentuch at T-B-O-H wrote: > Hi, > > I'm trying to set a route-map for my BGP that > when I get the default route from one of my transit > providers, I can handle it differently than the rest of > my BGP. I tried something like : > > ip access-list standard default-route > permit 0.0.0.0/0 > > but when I do a "sho run" I see : > > ip access-list standard test > permit any > > which isn't what I want... I'd like to > then use it in : > > route-map bgp-from-asXXXXXX-primary permit 40 > match ip address default-route > !I'm not sure about the syntax of that, I usually use match community. > !I'll > set metric 100 > set local-preference 105 > set community 35954:1000 35954:1006 35954:10061 additive > > > Thanks, > > Tuc > _______________________________________________ > foundry-nsp mailing list > foundry-nsp at puck.nether.net > http://puck.nether.net/mailman/listinfo/foundry-nsp >
-- Jamie Dahl "Thousands of tired, nerve-shaken, over-civilized people are beginning to find out that going to the mountains is going home; that wilderness is a necessity; and that mountain parks and reservations are useful not only as fountains of timber and irrigating rivers, but as fountains of life." --John Muir
