Dear Gunther, My Name is Jayabalan (JB for short) and I am from India. I head technology for a Datacenter here called Netmagic Solutions. We are in the process of upgrading our core from 100M to Gigabit and need features like BGP, OSPF, MPLS and Multi-VRF apart from Rate-limiting and Hierarchical QOS. We have shortlisted Cisco 7600 and Netiron MLX For this requirement. The Foundry MLX is very attractively priced compared to Cisco. Since you have been using the MLX for a couple of months now, Can you please give me your experiences with the box till now from Performance standpoint, Management standpoint and Operational and troubleshooting standpoint? In India the Cisco gear is all over the place and We may be only one of Few who could be going the Foundry way..
Your inputs will be highly appreciated. With Best Regards, JB -- **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. NetMagic Solutions Pvt. Ltd. has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. NetMagic Solutions Pvt. Ltd. reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the NetMagic Solutions Pvt. Ltd.'s e-mail system. ***************** End of Disclaimer *******************
