? Typically you would use a /30 address space for routing between your equipment and the customer equipment, then route the 2 /29's through that. That way the customer has full use of any assigned address space, as it stands it sounds like your equipment is using up one of 'their' addresses.
________________________________ From: [EMAIL PROTECTED] on behalf of Brendan Mannella Sent: Thu 3/22/2007 8:20 PM To: foundry-nsp at puck.nether.net Subject: [f-nsp] Subnet Question Hey Guys, This is a bit of a general networking question but hoping someone can help. I am trying to figure out the best way to route another subnet to a existing customer. I have dedicated server customers who have a been assigned their own vlan and /29. Then when they request another /29 instead of adding it as a secondary ip on the VIP, can I just use a static route? If not what is the best way to accomplish this. Thanks in Advance, Brendan -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.446 / Virus Database: 268.18.17/730 - Release Date: 3/22/2007 7:44 AM -------------- next part -------------- An HTML attachment was scrubbed... URL: https://puck.nether.net/pipermail/foundry-nsp/attachments/20070323/21863224/attachment.html
