I've gotten this to work before by doing the following in global config mode:
server no-remote-l3-check If you want to disable it on a per server basis, then in the server config you need to enter no-l3-check Note that there are different commands to disable health checks for remote or local real servers. --afsheenb dalton wrote: > > Hi, > > I have a foundry serveriron XL > > I am try to configure a vip to load balance postini mailservers (which act as > relay hosts for a local smtp server here). > > Here is the problem: > > It works fine if the server remote-name allows icmp (l3 check) > However, postini is blocking icmp. > > Is there a way to turn off l3 healthchk and use only l4? > > I have the remote-name configured as such: > > server remote-name postini1 x.x.x.x > source-nat > port smtp > port smtp l4-check-only > > but its still failing out. > > am i missing something obvious here? > > -dalton > _______________________________________________ > foundry-nsp mailing list > foundry-nsp at puck.nether.net > http://puck.nether.net/mailman/listinfo/foundry-nsp
