Hi! I answer my own question.
sFlow is only sampling incomming traffic and I had only enabled sFlow on the uplink port. As soon as I enabled sFlow on the other port it worked. /Morten On 6/7/07, Morten Isaksen <misak at misak.dk> wrote: > Hi! > > I am testing sFlow on a XMR that acts as a BGP router. > > The basic part is working. I receive extendedType SWITCH and > extendedType ROUTER information, but I do not receive extendedType > GATEWAY information and since I am interested in the AS path this is > bad. > > Do you have to do something special to get this information? The > manual states that the switch sends this information when BGP is > enabled. > > The firmware is 3.2.1c > > -- > Morten Isaksen > http://www.misak.dk/blog/ > -- Morten Isaksen http://www.misak.dk/blog/
