-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 There is a command in the SuperX (same as FESX) code 3.2.00 or later that turns on ve statistics. I believe it is something similar to: enable snmp ve-statistics
There are some heavy limitations though: * The Foundry device counts traffic from all virtual interfaces (VEs). For example, in a configuration with two VLANs (VLAN 1 and VLAN 20) on port 1, when traffic is sent on VLAN 1, the counters (VE statistics) increase for both VE 1 and VE 20. * The counters include all traffic on each virtual interface, even if the virtual interface is disabled. * The counters include traffic that is denied by ACLs or MAC filters. Note that the above CLI command enables SNMP to display virtual interface statistics. It does not enable the CLI or Web Management Interface to display the statistics. /Ryan Joseph Jackson wrote: > Hey all, > > Do you guys know of a way to poll traffic stats from a VE > interface on a FESX448 running full layer 3 code? I currently use cacti > to poll interfaces and I don't like the idea of doing all 48. > > > > Thanks in advance. > > > Joseph > _______________________________________________ > foundry-nsp mailing list > foundry-nsp at puck.nether.net > http://puck.nether.net/mailman/listinfo/foundry-nsp - -- Ryan M. Harden, BS, KC9IHX Office: 217-265-5192 CITES - Network Engineering Cell: 630-363-0365 2130 Digital Computer Lab Fax: 217-244-7089 1304 W. Springfield email: hardenrm at uiuc.edu Urbana, IL 61801 University of Illinois at Urbana/Champaign University of Illinois - ICCN -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (GNU/Linux) iD8DBQFHD48xtuPckBBbXboRAvUYAKCXYONaMv3lix9LHeEVZ+keH0/ndQCeOMwl BPLNKBDddKCoqyARPKPYOR0= =hxiG -----END PGP SIGNATURE-----
