Stefan Hegger wrote: > Hi, > > we have a lot of problems with the SSL stuff on Foundry on a > > SW: Version 09.5.02eTD2 Copyright (c) 1996-2003 Foundry Networks, Inc. > Compiled on Aug 04 2007 at 11:41:16 labeled as WXM09502e > (4093958 bytes) from Primary WXM09502e.bin > HW: ServerIronGT C-Series Switch, SYSIF version 21, Serial #: Non-exist > > SL 1: WSM6-SSL Management Module, SYSIF 2, M6, ACTIVE > > At first we had problems with the SSL keys. We did not know that you had to > put a passphrase (only small letters) on each key. If not you get problems > uploading the keys with SSL. > > Second we have problems uploading the certs. Sometimes we can upload 5 certs, > sometimes 2 sometimes 17. There seems not to be any logic. Does anybody has > the same problems? >
Hi list We have had a few issues with SSL (still going on) related to exporting SSL keypairs to the SI from a server. We don't use passwords on our keys as we use monitors on the webserver process, and if it fails, it is reloaded - using a key password would make this very difficult. So far, I have had successful uploads of keys to the SI (using a '*' in place of where the password would go in the scp string), but on trying to view the keyfile, I get kicked out of the ssh session with a "bad length" error. I am about to raise a ticket about this with our support contract, and if I get a solution to this, I'll post back. Mike
