Ooops...solved. 1. the boards were tested with older releases than 8.0.0. I rerun the tests with 8.0.0 and it works fine.
2. these ports are 1G *only* don't test 'em with 10/100 devices...;) thanks a lot and take care mm Mike Hughes ha scritto: > --On 21 April 2008 10:11 +0200 Mauro Magrassi <mauro at mix-it.net> wrote: > >> the board seems to be ok, but we cannot make any port on the board work. >> No signs of life out of loopback tests or other switch or routers >> connections. > > Have you tried the card in more than one chassis, or other cards in the > same slot in the same chassis? > > That should give you an idea if it's the slot/chassis or the card. > > Mike -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
