Hi, if you need 100T I fear this won't work without buying a whole 1000T Card. I bought some 1000T SFPs (for example Cisco 1000Base-T RJ45 SFP (GLC-T=)) some time ago for one of my FESX but I could not get them working on 100MBit. On 1000T they work, but not below. If that does not work there surely will be no module to install a FE on a 10G-Port.
regards Rolf > Foundry has a 100Base-FX SFP MMF. I do not know if it works in a XMR. > > The part number is E1MG-100FX. > > /Morten > > On Tue, Apr 22, 2008 at 9:25 PM, Alexander Koch <efraim at clues.de> wrote: >> Folks, >> >> is there any way to (ab)use any XMR port for a FE port? I know you can >> do stuff on Juniper >> with just setting a sysctl, and it is bad and all, right. However, I >> have a FE coming in >> and I did not exactly intend to buy any card for that, and I have only >> 10GE and did also >> not intend to have one switch with a 10GE uplink in there, kind of a >> waste... >> >> Any clues? Crazy thought, but what can be done? >> >> Alexander >> >> _______________________________________________ >> foundry-nsp mailing list >> foundry-nsp at puck.nether.net >> http://puck.nether.net/mailman/listinfo/foundry-nsp >> > > > > -- > Morten Isaksen > http://www.misak.dk/blog/ > _______________________________________________ > foundry-nsp mailing list > foundry-nsp at puck.nether.net > http://puck.nether.net/mailman/listinfo/foundry-nsp >
