Looks like this: vlan 100 by port tagged ethe 10 to 11 metro-ring 10 ring-interfaces ethernet 10 ethernet 11 enable
and then at the end you have topology-group 100 master-vlan 100 member-vlan a bunch of vlans here -----Original Message----- From: foundry-nsp-bounces at puck.nether.net [mailto:[EMAIL PROTECTED] On Behalf Of Lazuardi Nasution Sent: mercredi 11 juin 2008 3:25 To: foundry-nsp at puck.nether.net Subject: Re: [f-nsp] Multiple MRP Rings one big L2 Hi, May I know the MRP related of your configuration script ? Best regards, > From: "Rens" <rens at autempspourmoi.be> > To: <foundry-nsp at puck.nether.net> > Date: Tue, 10 Jun 2008 14:05:22 +0200 > Subject: [f-nsp] Multiple MRP Rings one big L2 > We have several MRP rings connected to each other where we run vlans over, > acting as one big layer2 network. > > We also have vlans which only run in the backbone ring (10) which are used > for OSPF between our routers in ring 10 > > Here you can see a very basic drawing ? > > _____ > | | > | 50 | > __|_____|_ > | | > | 20 | > |_________| > | | > | 10 | > |____| > > If we for example disable a link in ring 50 (because we need to do works on > that link) I can see that this impacts the other rings. I see OSPF > adjacencies going down/up on that very short moment between routers in ring > 10. > > I don't understand why a change in ring 50 could affect ring 10? > > All help appreciated. > > Regards, _______________________________________________ foundry-nsp mailing list foundry-nsp at puck.nether.net http://puck.nether.net/mailman/listinfo/foundry-nsp
