I have a several MLX-16's that are delivering IPTV to customers. Currently we have about 750megs of Variable bit video. They are MPEG2 streams egressing on 7 1gig ports, which are coming from my encoders (Tandberg iPlex's).
The problem I have, is once I add more and 200 megs of streams, all the video streams start to drop frames. Also the boot streams for the Set top Box's don't work as well. The Delay Factor will increase from a steady 10-15% to more and 1000% (analyzed with Ineoquest). Foundry TAC had look at this and had us upgrade to 3.7.0f and use the following commands on all the ports coming from the encoders: interface Ethernet 15/1 port-name Tannenburg Encoder #1 link qos multicast shaper best-effort rate 800000 qos multicast flow-control enable this seemed to work from about a week then the video started to die again. After increasing the rate to 900000 it start to function again. Is anyone else running IPTV over there MLX's?
