I have missed the "ssl card" statement in you first email - ups...
R, Oliver At 15:02 25.07.2008, Rantanen, Edward CTR wrote: >After trouble shooting (playing around) figured how the cards >interact with the software along their unique sets of commands. > >The commands act/re-act differently when ran from management card >vs. the SSL card. > >The management card does not echo, ssl out-put the same as the ssl >card itself. When I did an rconsole into the ssl card I was able to >see the error on the commands, or when doing a clear on the >key/certs the echo'd from the flash would show. > > > >Tks Oliver for assist. > >-----Original Message----- >From: oadam at madao.de [mailto:oadam at madao.de] >Sent: Friday, July 25, 2008 2:38 AM >To: Rantanen, Edward CTR; foundry-nsp at puck.nether.net >Subject: Re: [f-nsp] Problem doing gencsr > >I had a look at it and you are not supposed to use a password with >the gencsr command. That is how you should do it: > >SLB-ServerIron 4G# >SLB-ServerIron 4G#ssl genrsa RUN 1024 pass >SLB-ServerIron 4G#ssl gencsr RUN >You are about to be asked to enter information that will be >incorporated into your certificate request. What you are about to >enter is what is called a Distinguished Name or a DN. >Country name (2 letter code) [US] >State or province (full name) [California] >Locality name (city) [San Jose] >Organization name (Company name) [Foundry Networks] >Organizational unit name (department) [Web administration] >Common name (your domain name) [ www.foundrynet.com ><http://www.foundrynet.com/> ] >Email address [webadmin at foundrynet.com] > >Please try this. > >Cheers, > >Oliver > >At 19:09 24.07.2008, Oliver Adam wrote: > > > This looks like a bug to be honest - have you tried > software release 10.2.00? I am going to check 10.2.01 tomorrow and > I will let you know about the results. > > R, Oliver > > At 20:46 23.07.2008, Rantanen, Edward CTR wrote: > > > I am having a problem generating a csr, running > 10201b on an SI 450 with an ssl module. > > > #ssl genrsa testkey 1024 foundry123 -> works fine > > But when trying to do a: > > #ssl gencsr testkey foundry123 -> the command does > not show an error, but it shows another # for the next line with > nothing further. > > This is being done with a serial cable into a > laptop with hyperterm. > > > Any help would be appreciated. > > Ed > > _______________________________________________ > foundry-nsp mailing list > foundry-nsp at puck.nether.net > http://puck.nether.net/mailman/listinfo/foundry-nsp > <http://puck.nether.net/mailman/listinfo/foundry-nsp> > > > > _______________________________________________ > foundry-nsp mailing list > foundry-nsp at puck.nether.net > http://puck.nether.net/mailman/listinfo/foundry-nsp > <http://puck.nether.net/mailman/listinfo/foundry-nsp>
