Hi Tried to make hardware PBR on J-BXGMR4 but seems to be in processes it in software.
I have several ve interfaces and need to change default-gw for them to another one (possible gateways is three at now). It looks like: int ve 10 ip policy route-map alltogw1 int ve 17 ip policy route-map alltogw2 ip access-list standard permit any route-map alltogw1 match ip address 1 set ip default next-hop a.b.c.d route-map alltogw2 match ip address 2 set ip default next-hop g.h.j.k Each of ve interfaces have about 500-700Mbps of bandwidth, but only about 100-150Mbps of them will look for default gw. I use "default" in route-map to override only default gw. Statically 0.0.0.0/0 is removed from configuration, because without removing command "set ip default next-hop" isn't working (seems to be route-map can't override static default gw). Any ideas? Using 08.0.01qT53 firmware from Foundry Networks. Valeri Streltsov TiERA Broadband Operator http://www.tiera.ru Tel. +7 812 6111116 Fax +7 812 6220272 _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
