Hi Guys, I'm working on building some foundry equipment into a test bed to evaluate replacing some Extreme gear. I'm having an issue with BGP setup.
I have 2 BI4000's connected to each other through a FI1500. Straight layer 2 on the FI1500. I've attached an IP address to each 4000 and can ping between them. The problem is, when I bring up BGP between them it sticks in the "connect" state. Here's the config: router bgp local-as 10000 neighbor 172.16.1.1 remote-as 10000 Other 4000: router bgp local-as 10000 neighbor 172.16.1.2 remote-as 10000 Yes, it's supposed to be an iBGP session. I'm sure there's something super simple I forgot here. I'm not looking for any route maps or any other filtering at this point. Just want to get them talking to eachother and take it from there. Any ideas? Aaron _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
