Aaron: If you send a "show default values", you will see the default number of vlans, the currently configured number of vlans, and the system maximum.
You can make a change by sending something like "system-max vlan 128" to up the maximum number of VLANs. It's not recommended to just blindly max out the number of VLANs as they will consume resources. Instead, pick a reasonable number. Also note, you must write memory and reload after making any system-max change. Good luck, Jared Valentine [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Aaron Wendel Sent: Friday, November 07, 2008 10:25 PM To: [email protected] Subject: [f-nsp] VLAN limit? Anyone familiar with a 32 VLAn limit on a Bigiron 400 with the Jetcore IV management card? I am setting a new one up and it started erroring out about a L2 vlan limit when I hit 32 Vlans. Aaron _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
