Sended him the correct one as well :)
Met vriendelijke groet, With kind regards, Ronald Esveld network engineer Qi ict Delftechpark 35-37 Postbus 402, 2600 AK Delft T : +31 15 888 0 444 F : +31 15 888 0 445 E : mailto:[EMAIL PROTECTED] I : http://www.qi.nl/ Qi ict evenementen: Qi ict op de http://www.qi.nl/cms/publish/content/showpage.asp?pageid=431 -----Oorspronkelijk bericht----- Van: Mischa Peters [mailto:[EMAIL PROTECTED] Verzonden: donderdag 20 november 2008 14:54 Aan: Ronald Esveld CC: Anil; [email protected] Onderwerp: Re: [f-nsp] http -> https redirect That won't work. What happens in this case is that the server will receive an HTTPS request on port 80. They wouldn't know what to do with it. You need something like: csw-policy "p1" default redirect "*" "*" ssl ! server real www1 192.168.0.2 port http port http url "GET /hc.php" port ssl ! server real www2 192.168.0.3 port http port http url "GET /hc.php" port ssl ! server virtual www 192.168.0.80 port http port http csw-policy "p1" port http csw port ssl sticky bind http www1 http www2 http bind ssl www1 ssl www2 ssl ! Mischa > server real bla 1.2.3.4 > port http > port http keepalive > port 180 > ! > server real bla2 1.2.3.5 > port http > port http keepalive > port 180 > > server virtual blaat 1.2.3.6 > port default disable > port ssl sticky > port http sticky > bind ssl bla http bla2 http > bind http bla 180 real-port http bla2 180 real-port http > > That should do it > ROnald > > > Met vriendelijke groet, With kind regards, > > Ronald Esveld > network engineer > > Qi ict > Delftechpark 35-37 > Postbus 402, 2600 AK Delft > > T : +31 15 888 0 444 > F : +31 15 888 0 445 > E : mailto:[EMAIL PROTECTED] > I : http://www.qi.nl/ > > Qi ict evenementen: > Qi ict op de http://www.qi.nl/cms/publish/content/showpage.asp?pageid=431 > > -----Oorspronkelijk bericht----- > Van: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Namens Anil > Verzonden: woensdag 19 november 2008 16:46 > Aan: [email protected] > Onderwerp: [f-nsp] http -> https redirect > > Sorry, for the newbie question. I am not a network engineer, just > supporting something someone else maintains... > > SW: Version 09.5.02kTD2 Copyright (c) 1996-2003 Foundry Networks, > Inc. > Compiled on Apr 22 2008 at 17:14:32 labeled as WXM09502k > (4107327 bytes) from Primary WXM09502k.bin > HW: ServerIronGT C-Series Switch, SYSIF version 21, Serial #: > Non-exist > > > Is it possible to setup a HTTP -> HTTPS redirect on the LB? I have a > virtual server set as this: > > > Virtual server: host1 Status: enabled IP: 2.3.4.5 > http -------> fe-sf1-01: 1.2.3.4, http (Active) > fe-sf1-02: 1.2.3.5, http (Active) > ssl -------> fe-sf1-01: 1.2.3.4, ssl (Active) > fe-sf1-02: 1.2.3.5, ssl (Active) > > Thanks, > Anil > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
