I saw that but it doesn't seem to be supported in my version of software. Cal
From: Andy Vance [mailto:[email protected]] Sent: Monday, January 12, 2009 3:18 PM To: Calvin Gorriaran; '[email protected]' Subject: RE: [f-nsp] ServerIron XL, VLANs, DSR, Management... Actually the Foundry will accept untagged traffic on a tagged port if you set the port to dual-mode. Andy Vance Sr. Network Engineer Speakeasy Direct > 206.971.5144 * Fax > 206.728.1500 Email > [email protected]<mailto:[email protected]> * Web > www.speakeasy.net<http://www.speakeasy.net/> Voice * Data * Managed Services ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Calvin Gorriaran Sent: Monday, January 12, 2009 12:09 PM To: [email protected] Subject: Re: [f-nsp] ServerIron XL, VLANs, DSR, Management... Found the issue. It seems as though the Foundry will not accept any untagged traffic on a tagged port. I changed my core switch that is providing the VLAN traffic to the Foundry to have a native VLAN other than ID 1, the management IP works on VLAN 1. This is what I ended up with... #### Cisco Switch Providing VLANs to Foundry ##### interface Port-channel1 switchport trunk native vlan 200 switchport mode trunk interface GigabitEthernet0/15 channel-group 1 mode on ! interface GigabitEthernet0/16 channel-group 1 mode on #### Foundry Config #### ver 07.4.01T12 global-protocol-vlan ! trunk switch ethe 1 to 2 ! server source-ip 10.0.0.11 255.255.255.0 10.0.0.1 server source-ip 10.1.0.11 255.255.255.0 10.1.0.1 server router-ports 1 2 ! ! ! ! server real server-1 10.0.0.190 port http port http url "HEAD /" port ssl ! server real server-2 10.0.0.191 port http port http url "HEAD /" port ssl ! server real server-3 10.1.0.190 port http port http url "HEAD /" port ssl ! server real server-4 10.1.0.191 port http port http url "HEAD /" port ssl ! server virtual vserver-1 10.0.0.163 sym-priority 254 predictor least-conn port ssl no port ssl sticky port ssl dsr port http port http dsr bind ssl server-1 ssl server-2 ssl bind http server-1 http server-2 http ! server virtual vserver-2 10.1.0.163 sym-priority 254 predictor least-conn port ssl no port ssl sticky port ssl dsr port http port http dsr bind ssl server-3 ssl server-4 ssl bind http server-3 http server-4 http ! ! vlan 200 name DEFAULT-VLAN by port ! vlan 4 by port tagged ethe 1 to 2 ip-subnet 10.0.0.0 255.255.255.0 static ethe 1 to 2 ! vlan 2 by port tagged ethe 1 to 2 ip-subnet 10.1.0.0 255.255.255.0 static ethe 1 to 2 ! vlan 1 by port tagged ethe 1 to 2 ip-subnet 10.2.0.0 255.255.255.0 static ethe 1 to 2 ! default-vlan-id 200 ip address 10.2.0.22 255.255.255.0 ip default-gateway 10.2.0.1
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
