> > The problem now, if I have used UDLD between the NetIron and router1 and > > router2, the failure in router1 or router2 links will make the NetIron port > down. > UDLD should be used between Brocade devices and not between a Brocade and a other vendor devices.
> > > So is there any method that differentiates between different routers on the > same link in the UDLD? > > > > Or is there a solution that detects failure in router 1 and then drops the > route to router1 on the NetIron? > May be you can have a look into the routing protocol using objects Thanks -Sujith >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
