Hi Aaron,
Thank you for the info. And that is my gut feeling that its the
management card, but I have been instructed to find a "definitive"
reason for the reboots.
So if someone knows how I can pull any crash info from the fi and how to
analyze it that would be great.
Joe
Aaron Wendel wrote:
I had this exact issue on a BI about a month ago. It got worse and worse
until it started rebooting every couple minutes. No reason was ever found.
I replaced the management card and it hasn't restarted since.
Aaron
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Joseph Hardeman
Sent: Thursday, July 09, 2009 12:23 PM
To: [email protected]
Subject: [f-nsp] debugging restarts
Hi Everyone,
I have another fi that I found has started to restart on its own. I am
getting "Warm start" in the logs that alerted me. I did a show
tech-support but I did not see a reason for the restarts. I have
enabled "debug all" and set "debug destination log" until I can get a
console cable on it and redirect to console.
All power supplies and fans show ok.
Any suggestions on what to check to see why the system is restarting? I
am not seeing anything in the logs or sh commands that is giving me an
idea on what is causing the restarts.
Thanks
Joe
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
