Tomek
I did both of these and I have also cleared the dumps and am waiting for
the next restart.
How do I debug the dm save output? Is there a program or guide that
will help me understand what it means and what is causing the restarts?
Thanks
Joe
Tomasz Szewczyk wrote:
Hi,
I'm not sure if it is available on FI, but you can try to make sh tech
end log the output. A part of this output is "dm save" results which
can give overview of warm restart cause. This command exists on
XMR/MLX and is useful in such cases. If you have this command and "dm
save" or "sh tech" shows not correct date:
Created on : 05:00:19 GMT+01 Tue Jul 01 2008
You can try "dm clear" - and wait for another restart. The crash dump
is not overwritten if you don't clear it.
Tomek
On
Joseph Hardeman pisze:
Hi Jeroen,
We have an external syslog server, but nothing shows up except the
Warm restart. I need to take a put a console cable and hope
something shows up screen before crash.
Thanks
Joe
Jeroen Wunnink wrote:
I've had occasional reboots on BI (Ironcore and Jetcore) when using
aggregation options combined with BGP.
But try setting up an external syslog server and see if anything
strange pops up right before the reboot.
Joseph Hardeman wrote:
Hi Aaron,
Thank you for the info. And that is my gut feeling that its the
management card, but I have been instructed to find a "definitive"
reason for the reboots.
So if someone knows how I can pull any crash info from the fi and
how to analyze it that would be great.
Joe
Aaron Wendel wrote:
I had this exact issue on a BI about a month ago. It got worse
and worse
until it started rebooting every couple minutes. No reason was
ever found.
I replaced the management card and it hasn't restarted since.
Aaron
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Joseph
Hardeman
Sent: Thursday, July 09, 2009 12:23 PM
To: [email protected]
Subject: [f-nsp] debugging restarts
Hi Everyone,
I have another fi that I found has started to restart on its own.
I am getting "Warm start" in the logs that alerted me. I did a
show tech-support but I did not see a reason for the restarts. I
have enabled "debug all" and set "debug destination log" until I
can get a console cable on it and redirect to console.
All power supplies and fans show ok.
Any suggestions on what to check to see why the system is
restarting? I am not seeing anything in the logs or sh commands
that is giving me an idea on what is causing the restarts.
Thanks
Joe
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
