The SuperX does not support outbound ACLs. You would need something
like an MLX/XMR to get that feature.
Check the supported features in the release notes for the version of
software that you are running.
Thanks,
Jared
On Sep 16, 2009, at 9:25 AM, "Breger, Chris"
<[email protected]> wrote:
I have a SuperX switch which I am trying to apply an extended ACL
to a routed interface. When applying the ACL to the interface it
only gives me the option of “ip access-group in” not “ip
access-group out”. Any ideas why I cannot apply the ACL outbound?
Thanks in advanced!
ip access-list extended wlan
deny ip 172.21.100.0 0.0.0.255 172.16.0.0 0.0.255.255
deny ip 172.21.100.0 0.0.0.255 172.17.0.0 0.0.255.255
deny ip 172.21.100.0 0.0.0.255 172.19.0.0 0.0.255.255
deny ip 172.21.100.0 0.0.0.255 172.23.0.0 0.0.255.255
permit ip any any
tel...@phl17 (config-if-e1000-7/14)#ip access-group wlan ?
in Inbound packets
______________________________________________________________________
CONFIDENTIALITY NOTICE: This e-mail message, including any
attachments, is for the sole use of the intended recipient(s) and
may contain information which is confidential to, and/or privileged
in favor of, CDI Corporation or its affiliated companies (CDI) or
CDI's customers. Any review, use, reproduction, disclosure or
distribution by the recipient is prohibited without prior written
approval from an authorized CDI representative. This notice must
appear in any such authorized reproduction, disclosure or
distribution. If you are not the intended recipient, please contact
the sender by reply e-mail and destroy all copies of the original
message and any attachments. Thank you.
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
