FYI: The XMR/MLX series runs IPv6 in hardware and has had support for it for quite some time now. You just need to load the right CAM profile. There is support for IPv6 with BGP, IS-IS and OSPFv3. I'm currently using the XMR in production with IPv6 with BGP and IS-IS on 3.9.x without any problems.
-Vinny On Oct 7, 2009, at 6:55 PM, Clement Cavadore wrote: > Hi, > > > Le mercredi 07 octobre 2009 à 18:19 -0400, Joseph Hardeman a écrit : >> Yes, the J-BxGMR4 will do IPv6, but you need to have a software >> version greater than 08.0.x. > > > More precisely: You need Jetcore module *and* software equals to 08.x. > 9.x or 7.x do not have any IPv6 features. > > However, Jetcore manager runs a fully software-based IPv6 routing. > > Regards, > > Clément > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
