Chuck, the FLS, and all the other legacy Foundry gear uses a straight-thru DB9 female to female serial cable. It looks like it should be a null, but its not. Typically Cisco hoods will work, but sometimes you need to roll the cable on one end. There are pinouts to make your own hoods in most of the install guides. Hope that helps.
Mike On Mon, Dec 21, 2009 at 9:01 AM, Chuck Ufarley <[email protected]> wrote: > Hey all-- > > Just checking on the console cable for the FLS648. It's obviously not DB9 > to DB9, and a Cisco cable with a standard RJ45 to DB9 doesn't work. Does > anyone have information on where I can buy an FLS648 console cable? I'm not > having a whole lot of luck with Google and the knowledge base. > > Thanks much. > > --Chuck > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
