Hi Jared, just to say this worked a treat, why this is hidden I don't understand but yes 'use default' followed by 'boot' allows you to boot without loading the config.
Thanks! Steve On Mon, Feb 1, 2010 at 2:21 PM, Jared Valentine <[email protected]> wrote: > Instead of "no password" try "use default" That should bring up the switch > with a default config. > > If that doesn't work, try booting from tftp... In case your software image > is corrupted. > > Jared > > > On Feb 1, 2010, at 2:16 AM, Stephen Wilcox <[email protected]> > wrote: > >> Hi, >> does anyone know how to erase/prevent the config from loading on a >> FESX? On a Cisco this is the equivalent of changing the boot >> parameter. >> >> I can easily see how to do 'no password' but in this case the box >> fails to boot and throws an exception when it starts trying to load >> the config. Hence I need to stop it at the boot prompt and try to get >> it up as factory default.... >> >> Out of interest, if anyone's seen the below exception, any clue what it >> means? >> >> PP: mem >> Exception Type 1100 (Data TLB Miss on Load), appl >> 0000f030(msr) >> 00000000(dar) >> 40000000(dsisr) >> 005dc340(pc) >> 005dc448(lr) >> 005dc448 >> 00617090 >> 00644d38 >> 00613c6c >> 005cc560 >> 0057c694 >> 000048b8 >> End of Trace >> >> Cheers >> Steve >> _______________________________________________ >> foundry-nsp mailing list >> [email protected] >> http://puck.nether.net/mailman/listinfo/foundry-nsp > _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
