Hi Everyone,
I have been asked to look into helping to set up a network using
super-vlan and sub-vlans so that they can have a single gateway IP for
multiple vlans. I did find this faq on the subject
http://www.faqs.org/rfcs/rfc3069.html. But I have not been able to find
a good example on how to set this up on Foundry gear. Does anyone have
a working config that they would be willing to share that would help me
out? There are two core routers that would do VRRP to provide
redundancy for the gateway IP with Foundry layer2 switches downstream to
the servers and they want to be able to segment via vlan's different
groups and their servers. And this way if someone needs additional
IP's all they have to do is add from unused IP's in the /24 and don't
have to change their active systems.
For example:
Gateway address 1.1.1.1/24 vlan 100
group1 servers: 1.1.1.3 - 1.1.1.18 vlan 10
group2 servers: 1.1.1.19 - 1.1.1.25 vlan 11
group3 servers: 1.1.1.26 - 1.1.1.27 vlan 12
Gateway address 1.1.2.1/24 vlan 101
group4 servers: 1.1.2.3 - 1.1.2.18 vlan 14
group5 servers: 1.1.2.19 - 1.1.2.25 vlan 15
group6 servers: 1.1.2.26 - 1.1.2.27 vlan 16
Thanks for everything.
Joe
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
