I think you need to follow some basic trunking rules:
You must start on an odd port and end on an even port.
You must use contiguous ports (in pairs).
So, for example: if you wanted a multiple slot trunk using ports 3/1
and 4/1 then you would:
Trunk e 3/1 to 3/2 e 4/1 to 4/2
Trunk deploy
Because 3/2 resides on the same ASIC as 3/1 you must include it in the
trunk configuration.
You now have a 4 port trunk. You don't have to use ports 3/2 and 4/2
in the actual trunk... The trunk will work even if you only connect 2
ports.
The gotcha is that you can't use those ports (3/2 and 4/2) for
anything else except the trunk.
Jared
On Mar 16, 2010, at 5:09 PM, Pior Bastida <[email protected]> wrote:
On March 16, 2010 06:39:25 pm Michiel Muhlenbaumer wrote:
Use: trunk server eth 2/3 eth 3/3
Thanks for your suggestion Michiel, I didn't mention it, but I have
tried that
without success:
(config)#trunk server eth 2/3 eth 3/3
Invalid input -> eth 3/3
Type ? for a list
It really just expects a range:
(config)#trunk server eth 2/3
to To an end range
Regards,
Michiel
On 16 mrt 2010, at 22:04, Pior Bastida <[email protected]> wrote:
Hi all.
I'm trying to setup a trunk multi-slot in a ServerIron/WSM6
2 x 2 ports is working just fine:
(config)# trunk server ethe 2/1 to 2/2 ethe 3/1 to 3/2
But I can't create a trunk of 2 ports on 2 slots:
(config)#trunk server ethernet 2/3 to 2/3 ethernet 3/3 to 3/3
error - incorrect port list order
This is frustrating as it seems to be a mere syntactic problem and
not a
technical issue.
Is there a way to achieve that ?
--
Pior Bastida
[email protected]
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
