Hi, Indeed, a FESX is able to set tag-type per 12 ports (per ASIC?) 10/100/1000 and per 10G port. I have found that it was unable to 'translate' tag types:
Tag-type 0x9100 e 13 Vlan 100 Tagged e 1 e 13 [A] --- 0x8100 vid 100 --- [port1 FESX port13] --- 0x9100 vid 100 --- [B] It appeared that B receives 0x8100-tagged frames sent from A, although one would expect this to be 0x9100. The version of the FESX (424 PREM and 624 PREM) is 05.0.00T3e3. Could be that other versions do not have this issue. Regards, Jorik Jonker Special Projects, Netherlands [email protected] +31 53 434 0570 TEL +31 53 436 3098 FAX KvK: 06092246 EQUINIX -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Peter Olsen Sent: donderdag 18 maart 2010 8:20 To: Stephen Wilcox; [email protected] Subject: Re: [f-nsp] Support for tag-type on FESX? You cannot set this on individual ports on fesx. It is set per 'port region' 12 ports at the time. At least older sw even have a bug on this and either the entire box runs 8100 or 9100 or xxxx. Haven't been playing with it for some time so I'am not sure if it have been fixed in newer releases. I guess that this also explains why the sh tag-type do not work :-) Med venlig hilsen/Best regards Peter Olsen CTO D: +45 7730 3122 M: +45 2726 3122 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Stephen Wilcox Sent: 17. marts 2010 21:59 To: [email protected] Subject: [f-nsp] Support for tag-type on FESX? Hi, setting up something like below: <customer tagged port with VLANs>----tagged 0x8100----[FESX]----tagged 0x9100----[FESX] ----tagged 0x8100----<customer tagged port with VLANs> note there is no untagged/tagged mismatching so we are not trying to do qinq with the customer vlans. The above works for other Foundry platforms just fine, for FESX tho it seems to put 0x8100 onto the wire in the middle, which, doesn't work. Does the FESX not support having different ports with different tag-types? (Of course, the tag-type is per dma, so the ports are allocated to ensure they are using the different tag-types) Has anyone tried this or have it working? I'm also a little concerned that the 'sh tag-type' command doesn't work. These are all documented as being features. Cheers Steve _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp This email is from Equinix Europe Limited or one of its associated/subsidiary companies. This email, and any files transmitted with it, contains information which is confidential, may be legally privileged and is solely for the use of the intended recipient. If you have received this email in error, please notify the sender and delete this email immediately. Equinix Europe Limited. Registered Office: Quadrant House, 4 Thomas More Square, London E1W 1YW. Registered in England and Wales, No. 6293383. _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
