Sure, the BI will run several full tables with no problem.
But the problem I (and a customer recently with his own BI) ran into,
aside from a very small CAM table running full very quickly, was
unexplainable packetloss at 200Mbit+ traffic levels.
It was a very minor amount of loss (0.1% to 0.5%), but noticable enough
to make it unusable for UDP audio streams.
And I've seen this only on BI's doing BGP, I have several BI's doing
basic L3 (gateway for vlans, ospf, etc) with no problems.
So if you can avoid it, don't use the Jetcores for BGP related work.
On 4/6/10 6:30 PM, Chuck Ufarley wrote:
Hi all--
I'm trying to figure out if I can run 500k - 600k routes of a full BGP
table on a standard J-BxGMR4 (512MB) with a BigIron 4000 chassis. At
this point I'm thinking no, but is anyone running anything like it?
And looking at Foundry/Brocade's site doesn't give me much
information, but does anyone have the specs on how much traffic a
B4000 can handle at one time?
Any direction on how to find this info without bothering you again
would be great, too. Sorry to be a bother.
And thanks!
--Chuck
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
--
Met vriendelijke groet,
Jeroen Wunnink,
EasyHosting B.V. Systeembeheerder
[email protected]
telefoon:+31 (035) 6285455 Postbus 48
fax: +31 (035) 6838242 3755 ZG Eemnes
http://www.easyhosting.nl
http://www.easycolocate.nl
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
