Morning Chuck,
Does the "show chassis" command meet your requirements? Regards Frankie From: [email protected] [mailto:[email protected]] On Behalf Of Chuck Ufarley Sent: 20 April 2010 18:35 To: [email protected] Subject: [f-nsp] Showing Power Parameters for Export Hey all-- I'm sending some gear off to Kuwait, and have to produce a tech report that proves conformation to foreign power specs (Mains Voltage incorporating 240V or 415 V + Mains frequency 50 Hz). The power supplies are clearly marked with these specs, but I can't seem to find a command for a BI4000 or BI8000 chassis. Any advice? Thanks much. --Chuck -------------------------------------------------------------------------------- This message is for information purposes only and is not intended as an offer, recommendation or solicitation to buy or sell, nor is it an official confirmation of terms. No representation or warranty is made that this information is complete or accurate. Any views or opinions expressed do not necessarily represent those of ODL Securities Limited. This email and the information it contains may be confidential, proprietary or legally privileged. If you receive this message in error, please notify the sender and delete it from your system. You must not, directly or indirectly, use, disclose, distribute, copy or store this message or any part of it if you are not the intended recipient. Unless otherwise stated, any pricing information given in this email is indicative only, is subject to changes and does not constitute an offer to deal at any price quoted. ODL Securities Limited is authorised and regulated by the Financial Services Authority. --------------------------------------------------------------------------------
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
