It kinda depends on what you're looking to achieve. VRFs and virtual routers are similar, but with slightly different setup requirements. For Juniper's version of logical-router though, there's a separate routing daemon started for each logical router (so if one crashes, the others aren't affected). Again, depends on what you're looking to to.
DB On 29 April 2010 21:55, Samit <[email protected]> wrote: > Umm..well Brocade engineer says that it is doable because you can assign > a physical port to the VRF therefore it can deliver the same > functionality like logical router . So, I just wanted to get expert > opinion and confirmation from this list. > > Regards, > Samit > > > Romain DEGEZ wrote: >> On Thursday 29 April 2010 12:12:01 Samit wrote: >>> Hi, >>> >>> Does MLX/XMR support both virtual and logical router like juniper does? >>> >>> http://www.baynetwork.com/Forum/index.php?topic=437.0;wap2 >>> http://forums.juniper.net/t5/Routing/Difference-between-logical-router-and- >>> virtual-router/m-p/19095 >>> >>> Is it possible to divide one mlx or xmr with 20Gig line card into 4 >>> logical router with 5 ports in each router and do a physical cross >>> connect between each logical router? Any gotcha? >> >> Hi, >> >> No, to my knowledge there is no such feature in XMR/MLX ironware. Only VRF. >> >> Regards, >> > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
