Raoul, the release notes or your local SE would be the primary resources to make sure an upgrade is right for you, but basically the releases break down like this:
7.0.0- Converged release, brings most of the FastIron product line into the same version of code, for feature parity and common configuration across the family. Also DHCP option 82 insertion across the line. 7.1.0- Software licensing for L3, rapid failover for stacking on FCX. 7.2.0- (Upcoming) Will bring hitless failover to SX, and FCX stacking. Hope that helps, Mike On Thu, May 27, 2010 at 6:16 AM, Scott T. Cameron <[email protected]>wrote: > I recently upgraded all my FESX 648/448 and SuperX to 7.1. So far, so > good. Most of my switches previously were on a 4.x line, some were on 5.x. > > \There have been no major game changing features in the recent releases, at > least not for my purposes -- these devices do very basic routing, lacp and > switching. I've been told by Brocade that BGP4+ (IPv6 BGP) will be a > feature available in 7.3 or later -- so unless you have any major bugs that > are causing you issues, I would say hold off. > > Scott > > > On Thu, May 27, 2010 at 9:07 AM, Raoul Bhatia [IPAX] <[email protected]>wrote: > >> hi, >> >> there have been a couple of new ironware releases during the last year: >> >> * R05.1.00/R05.1.00b/R05.1.00c in 2009/2010 >> * R07.00.1b/R07.00.1c in early 2010 >> * and most recently R.07.1.00 in May >> >> i was wondering if there are any significant changes in these releases. >> have there been any "public" release announcements (we've got a valid >> support contract for our devices) or are the release notes the only >> place one can take information from? >> >> i'm running 05.1.00c on most of our devices and wonder if upgrading >> would benefit me in any way. >> >> does anyone of you have any practical experience with the latest >> releases, did you perhaps upgrade from R04.x.y code or do you live a >> "never touch a running system" approach? >> >> thanks, >> raoul >> -- >> ____________________________________________________________________ >> DI (FH) Raoul Bhatia M.Sc. email. [email protected] >> Technischer Leiter >> >> IPAX - Aloy Bhatia Hava OG web. http://www.ipax.at >> Barawitzkagasse 10/2/2/11 email. [email protected] >> 1190 Wien tel. +43 1 3670030 >> FN 277995t HG Wien fax. +43 1 3670030 15 >> ____________________________________________________________________ >> _______________________________________________ >> foundry-nsp mailing list >> [email protected] >> http://puck.nether.net/mailman/listinfo/foundry-nsp >> > > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
