hi, i have a dead/bricked/damaged/whatsever foundry edgeiron 4802cf.
c/p from the boot sequence with additional comments > Image Loader 1.1.0.0 > Loading Diagnostic Image File : EIF4802CF_dv1012.bin > > > > > Diagnostics 1.0.1.2 > MAC Address : AAAA-AAAA-AAAA > Serial Number : [none] > Hardware Version : [none] > Manufacture Date : [none] > Project ID : 60 > Board ID : -1431655766 > Now is Normal Mode! the above diagnostics look very wrong ... > --- Performing Power-On Self Tests (POST) --- > UART Loopback Test......................PASS > Timer Test..............................PASS > DRAM Test ..............................PASS > I2C Initialization......................PASS > Runtime Image Check ....................PASS > PCI Device Check .......................PASS > Switch Driver Initialization............PASS > Switch Internal Loopback Test...........PASS > ------------------- DONE -------------------- > > Shutdown switch ... Done. > Loading Runtime Image File : EIF4802CF_v22519.bin > Runtime 2.2.5.19 this basically looks fine. > Can not get related board information.: errno = 0xd0003 > Assertion failed: 0, file N:/Src/Core/stkmgmt2/stktplg/stktplg_mgr.c, line 463 imho, this is the result of the invalid board id. is there any chance that i, as a sysadmin (and non electrician ;) ) might be able to revive this unit? thanks, raoul -- ____________________________________________________________________ DI (FH) Raoul Bhatia M.Sc. email. [email protected] Technischer Leiter IPAX - Aloy Bhatia Hava OG web. http://www.ipax.at Barawitzkagasse 10/2/2/11 email. [email protected] 1190 Wien tel. +43 1 3670030 FN 277995t HG Wien fax. +43 1 3670030 15 ____________________________________________________________________ _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
