Hi, I have done this before. But can't seem to remember how I did it. Anyone remember the command to hide those dsa or rsa certificates and also the ssl certificates?
I searched the manual but in vain. Thanks in advance. Regards, Eman On 8/8/10, [email protected] <[email protected]> wrote: > Send foundry-nsp mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://puck.nether.net/mailman/listinfo/foundry-nsp > or, via email, send a message with subject or body 'help' to > [email protected] > > You can reach the person managing the list at > [email protected] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of foundry-nsp digest..." > > > Today's Topics: > > 1. NI-MLX MP/LP not booting from flash (Chuck Ufarley) > 2. Re: NI-MLX MP/LP not booting from flash (Niels Bakker) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 6 Aug 2010 09:11:36 -0700 > From: Chuck Ufarley <[email protected]> > To: [email protected] > Subject: [f-nsp] NI-MLX MP/LP not booting from flash > Message-ID: > <[email protected]> > Content-Type: text/plain; charset="iso-8859-1" > > Hey all-- > > I'm having trouble upgrading to the late 4.1xxx code and the 5.xxx code on > the NI-MLX. Anyone else getting this error on attempting to reboot? > > NetIron MLX-4 Router#reload > Checking for coherence... > > Image coherence check: Can't open startup config file. > Warning: Image coherence check skipped due to insufficient info: MP/LP not > booting from flash. > Are you sure? (enter 'y' or 'n'): > > ********************** > > It's odd, because if I enter the boot system flash primary command and save > the config, the problem goes away, but I've never had to do that before. Is > it now a requirement to perform a coherence check before reloading? > > Here's the basic rundown of the box. I hope one of you might know what I > may be doing wrong: > > NetIron MLX-4 Router#sho run > Current configuration: > ! > ver V4.1.0dT163 > module 1 ni-mlx-20-port-1g-100fx > ! > ! > no spanning-tree > ! > ! > vlan 1 name DEFAULT-VLAN > ! > ! > boot sys fl pri > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > ! > interface management 1 > enable > ! > ! > ! > ! > ! > ! > ! > end > > NetIron MLX-4 Router#sho ver > HW: NetIron MLX 4K Router > Chassis (Serial #: SA08075129, Part #: 35550-000B) > NI-X-SF Switch Fabric Module 1 (Serial #: SA13070756, Part #: 35548-100B) > FE 1: Type fe200, Version 2 > NI-X-SF Switch Fabric Module 2 (Serial #: SA13070789, Part #: 35548-100B) > FE 1: Type fe200, Version 2 > ========================================================================== > SL M2: NI-MLX-MR Management Module Active (Serial #: SA18070467, Part #: > 35524-1 > 01C): > Boot : Version 3.5.0T165 Copyright (c) 1996-2009 Brocade Communications > Syst > ems, Inc. > Compiled on Jul 10 2007 at 19:13:56 labeled as xmprm03500 > (424484 bytes) from boot flash > Monitor : Version 4.1.0bT165 Copyright (c) 1996-2009 Brocade Communications > Sys > tems, Inc. > Compiled on Feb 26 2010 at 18:33:34 labeled as xmb04100b > (464413 bytes) from code flash > IronWare : Version 4.1.0dT163 Copyright (c) 1996-2009 Brocade Communications > Sys > tems, Inc. > Compiled on Jul 1 2010 at 21:51:20 labeled as xmr04100d > (5363454 bytes) from Primary > Board ID : 00 MBRIDGE Revision : 21 > 916 MHz Power PC processor 7447A (version 8003/0101) 166 MHz bus > 512 KB Boot Flash (AM29LV040B), 32 MB Code Flash (MT28F128J3) > 1024 MB DRAM > Active Management uptime is 2 minutes 59 seconds > ========================================================================== > SL 1: NI-MLX-1Gx20-SFP 20-port 1GbE-100FX Module (Serial #: SA16070395, Part > #: > 35604-100B) > Boot : Version 3.2.1cT175 Copyright (c) 1996-2009 Brocade Communications > Sys > tems, Inc. > Compiled on Feb 28 2007 at 20:04:00 labeled as xmlprm03201c > (334645 bytes) from boot flash > Monitor : Version 4.1.0bT175 Copyright (c) 1996-2009 Brocade Communications > Sys > tems, Inc. > Compiled on Feb 26 2010 at 18:34:18 labeled as xmlb04100b > (422399 bytes) from code flash > IronWare : Version 4.1.0dT177 Copyright (c) 1996-2009 Brocade Communications > Sys > tems, Inc. > Compiled on Jul 1 2010 at 21:55:36 labeled as xmlp04100d > (3681796 bytes) from Primary > FPGA versions: > Valid PBIF Version = 3.14, Build Time = 12/17/2008 14:32:00 > > Valid XPP Version = 5.22, Build Time = 8/6/2009 19:10:00 > > BCM5695GMAC 0 > BCM5695GMAC 1 > 666 MHz MPC 8541 (version 8020/0020) 333 MHz bus > 512 KB Boot Flash (AM29LV040B), 16 MB Code Flash (MT28F640J3) > 512 MB DRAM, 8 KB SRAM, 286331153 Bytes BRAM > PPCR0: 768K entries CAM, 8192K PRAM, 2048K AGE RAM > LP Slot 1 uptime is 2 minutes 36 seconds > ========================================================================== > All show version done > NetIron MLX-4 Router#sho fla > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Active Management Module (Right Slot) > Code Flash - Type MT28F128J3, Size 32 MB > o IronWare Image (Primary) > Version 4.1.0dT163, Size 5363454 bytes, Check Sum 4eb9 > Compiled on Jul 1 2010 at 21:51:20 labeled as xmr04100d > o IronWare Image (Secondary) > Version 3.2.1cT163, Size 7468247 bytes, Check Sum c107 > Compiled on Feb 28 2007 at 20:00:40 labeled as xmr03201c > o LP Kernel Image (Monitor for LP Image Type 0) > Version 4.1.0bT175, Size 422399 bytes, Check Sum e57e > Compiled on Feb 26 2010 at 18:34:18 labeled as xmlb04100b > o LP IronWare Image (Primary for LP Image Type 0) > Version 4.1.0dT177, Size 3681796 bytes, Check Sum 6c67 > Compiled on Jul 1 2010 at 21:55:36 labeled as xmlp04100d > o LP IronWare Image (Secondary for LP Image Type 0) > Version 3.2.1cT177, Size 2310700 bytes, Check Sum 4531 > Compiled on Feb 28 2007 at 20:23:56 labeled as xmlp03201c > o Monitor Image > Version 4.1.0bT165, Size 464413 bytes, Check Sum 894a > Compiled on Feb 26 2010 at 18:33:34 labeled as xmb04100b > Boot Flash - Type AM29LV040B, Size 512 KB > o Boot Image > Version 3.5.0T165, Size 424484 bytes, Check Sum b751 > Compiled on Jul 10 2007 at 19:13:56 labeled as xmprm03500 > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Line Card Slot 1 > Code Flash: Type MT28F640J3, Size 16 MB > o IronWare Image (Primary) > Version 4.1.0dT177, Size 3681796 bytes, Check Sum 6c67 > Compiled on Jul 1 2010 at 21:55:36 labeled as xmlp04100d > o IronWare Image (Secondary) > Version 3.2.1cT177, Size 2310700 bytes, Check Sum 4531 > Compiled on Feb 28 2007 at 20:23:56 labeled as xmlp03201c > o Monitor Image > Version 4.1.0bT175, Size 422399 bytes, Check Sum e57e > Compiled on Feb 26 2010 at 18:34:18 labeled as xmlb04100b > Boot Flash: Type AM29LV040B, Size 512 KB > o Boot Image > Version 3.2.1cT175, Size 334645 bytes, Check Sum 510c > Compiled on Feb 28 2007 at 20:04:00 labeled as xmlprm03201c > FPGA Version (Stored In Flash): > PBIF Version = 3.14, Build Time = 12/17/2008 14:32:00 > > XPP Version = 5.22, Build Time = 8/6/2009 19:10:00 > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > All show flash done > NetIron MLX-4 Router# > > > Thanks everyone. > > --Chuck > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <https://puck.nether.net/pipermail/foundry-nsp/attachments/20100806/780e19e3/attachment-0001.html> > > ------------------------------ > > Message: 2 > Date: Fri, 6 Aug 2010 19:12:30 +0200 > From: Niels Bakker <[email protected]> > To: [email protected] > Subject: Re: [f-nsp] NI-MLX MP/LP not booting from flash > Message-ID: <[email protected]> > Content-Type: text/plain; charset=us-ascii; format=flowed > > * [email protected] (Chuck Ufarley) [Fri 06 Aug 2010, 18:58 CEST]: >>I'm having trouble upgrading to the late 4.1xxx code and the 5.xxx >>code on the NI-MLX. Anyone else getting this error on attempting to >>reboot? >> >>NetIron MLX-4 Router#reload >>Checking for coherence... >> >>Image coherence check: Can't open startup config file. Warning: >>Image coherence check skipped due to insufficient info: MP/LP not >>booting from flash. >>Are you sure? (enter 'y' or 'n'): >> >>********************** >> >>It's odd, because if I enter the boot system flash primary command >>and save the config, the problem goes away, but I've never had to do >>that before. Is it now a requirement to perform a coherence check >>before reloading? > > Yes, it got introduced a while ago. I guess I wasn't the only one who > kept forgetting to upgrade/downgrade FPGA code when inserting a new > module or an RMA'd one into a switch and have things not work in weird > ways. Saving the config should be enough, though, I don't have any > boot commands on my MLXen. And you can actually ignore the warning if > you want to, it's not necessarily an error, otherwise you wouldn't be > able to do "erase startup-config"/"reload". > > > -- Niels. > > -- > > > ------------------------------ > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > > End of foundry-nsp Digest, Vol 91, Issue 5 > ****************************************** > -- Sent from my mobile device Regards, Emmanuel Muncal, ECE http://framesofanemn.blogspot.com -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GE d- s: a28- C++++ UL++ P L++ E--- W++ N+ o-- K- w O+ M- V-- PS+ PE+ Y PGP- t 5+ X+ R* tv+ b+ DI++ D- G e++ h---- r+++ y+++ ------END GEEK CODE BLOCK------ _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
