>> M1 : 192.168.1.3/24 is in building A (with a default gateway on B) >> M2 : 192.168.2.3/24 is in building A (with a default gateway on B) >> M3 : 192.168.3.4/24 is in building A (with a default gateway on A) >> M4 : 192.168.3.3/24 is in building A > > I'm assuming you have dot1q between A and B?
Yes, there is dot1q between A and B (it's vlan 128 for instance) this vlan is configured as UNTAGGED on all physical ports. > Do you not have a L3 interface on A in 192.168.1/24? Nope, "A" does not have any ve interfaces in 192.168.1/24. >> machine 1 -> A(L3) -> B(L3) -> A(L2) -> machine 2 is very very slow. >> machine 1 -> A(L3) -> machine 2 is fast >> machine 1 -> A(L3) -> B(L3) -> machine 2 is fast > > Where is machine 2 physically located - building A or building B? In the case : machine 1 -> A(L3) -> B(L3) -> A(L2) -> machine 2 : machine 2 is physically located in building A In the case : machine 1 -> A(L3) -> machine 2 : machine 2 is in building A or B (the result is the same) In the case : machine 1 -> A(L3) -> B(L3) -> machine 2 : machine 2 is physically located in building B > Is the 50Mb/s pushing close to 100% on some port? Why is it only at 50Mb/s? It's related to the transfer protocal and the disk speeds. Youssef _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
