Great, that actually worked really really well. The only other thing I need to figure out is when configuring the management port should you create a vlan and dedicate that vlan to the management port, or just use the global ip configuration?
I guess it doesn't matter as long as the management port isn't connected to the other ports. -Drew From: Jared Valentine [mailto:[email protected]] Sent: Friday, November 19, 2010 1:32 PM To: Drew Weaver Cc: foundry-nsp Subject: Re: [f-nsp] Brocade/Foundry-Fu a little weak today. Should be close to this: Conf t Int e 1 to 2 Link-agg conf key 10001 Link-agg active Vlan 100 Untagged eth 24 Tag e 1 to 2 This makes your port channel + trunk on eth 1-2, and your vlan 100 access port on 24. Jared On Nov 19, 2010, at 11:16 AM, Drew Weaver <[email protected]<mailto:[email protected]>> wrote: Does anyone know what the brocade equivalent of this would be? conf t vlan 100 exit int g0/27 swi swi mod ac swi ac vlan 100 int Port-channel1 swi swi mod trunk swi trunk encaps dot1q swi trunk allowed vlan 100 This is a Brocade Turboiron24x -Drew _______________________________________________ foundry-nsp mailing list [email protected]<mailto:[email protected]> http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
